Section 5 - Predelivery and Customer Delivery Checklists
Page 54 CMD-4082082 / 90-8M0052072 eng FEBRUARY 2011
Pre‑Delivery Information
IMPORTANT: This section guides our boat dealers and boat company service personnel in the proper initial (pre‑delivery) service
of the Cummins MerCruiser Diesel Axius products. The Dealer Pre‑Delivery Checklist must be completed prior to delivery of the
product to the customer and is not a substitute for the maintenance schedules listed in the Operation, Maintenance, and Warranty
manual. If you have not been trained in the recommended service procedures for this product, contact an authorized Cummins
MerCruiser Distributor or Dealer technician to have the work performed. Improper pre‑delivery checks, inspection, or servicing of
this Cummins MerCruiser Diesel product could result in damage to the product or personal injury to those servicing and operating
the product.
Refer to the VesselView owners literature and the appropriate sections of this manual to complete the pre‑delivery checklist.
Dealer Pre‑Delivery Checklist for Axius Products (Before Delivery to the
Customer)
NOTE: Literature part numbers are subject to revision. See your authorized Cummins MerCruiser Authorized Distributor for the
most recent literature release.
Publication Name Publication Part Number
QSD Axius 2.8L and 4.2L Operation, Maintenance, and Warranty Manual 90‑866933081
VesselView Operation Manual 90‑8M0050668
Captain's Briefing Information Brochure –
Warranty Registration Card –
Skyhook (If Equipped)
Publication Name Publication Part Number
Skyhook Operational DVD 90‑899883257
Skyhook Quick Reference Card 90‑8M0052427
Skyhook Warning Label Placement instructions 90‑899883259
Skyhook Helm Label 8M0034159
SKyhook Passenger Label 8M0034160
Before Starting—Key Off
Dealer Check Checklist Item
☐ Identification Record table listed on front page is filled out.
☐ Copy of all required support publications present
☐ Engine mount and isolator mounting cap screws are tight
☐ All fuel connections are tight
☐ Seawater system hose clamps are tight
☐ Exhaust system hose clamps are tight
☐ All electrical connections secure
☐ Coolant recovery bottle and expansion tank level—check/fill
☐ Engine oil level—check/fill
☐ Hydraulic steering fluid level—check/fill
☐ Drive gear lube fluid level—check/fill
☐ Seacocks open (Refer to Starting and Stopping the Engines)
To Next Page
Loading...
Need help?
General
