Mercury Axius System User Manual

Section 5 - Predelivery and Customer Delivery Checklists
CMD-4082082 / 90-8M0052072 eng FEBRUARY 2011 Page 55
Before Starting—Key On
Dealer Check Checklist Item
☐ Audio warning horn chirp at key on
☐ Check the VesselView for fault codes
☐ Neutral lights on the ERC lever assembly
Engines Running at the Dock
Dealer Check Checklist Item
☐ Key switch and Start / Stop buttons—operational check
☐ Check sea water flow—visual check
☐ Throttle only / Gear lockout—operational check
☐ Forward ‑ Neutral ‑ Reverse gear—operational check
☐ Idle increase / decrease—operational check
☐ Lanyard stop switch—operational check
☐ E‑Stop switch, if equipped—operational check
☐ Exhaust leaks—visual check
☐ Fluid leaks—visual check
Sea Trial
Dealer Check Checklist Item
☐ VesselView—functional check all operational modes
☐ Instrumentation—check
☐ Joystick—functional check
☐ Single lever—functional check
☐ Drive trim operation—check trim in and out
☐ Steering operations at all speed ranges—functional check
☐ WOT RPM—check
☐ Auto Heading—functional check
☐ Auto Heading course change—functional check
☐ Skyhook—functional check
☐ Waypoint tracking—functional check
After On Water Test
Dealer Check Checklist Item
☐ Fluid leaks—monitor and document
☐ Oil and fluid levels—visual check
☐ Supply the customer with the QSD Axius 2.8L and 4.2L Operation, Maintenance, and Warranty Manual
☐ Supply the customer with the VesselView Operations manual
☐ Supply the customer with the Captain's Briefing Information brochure
☐ Supply the customer with the Warranty Registration Card

Mercury Axius System Specifications

General

Brand	Mercury
Model	Axius System
Category	Boating Equipment
Language	English