11
Safety
Pr
ecautions
Installa
tion
Requirements
Installa
tion
Instructions
Grounding Ins
tructions:
•
The dish
washer must be connected to a grounded metal, permanent
wiring system, or an equipment grounding conductor must be run with
the circuit conductors and be connected to the equipment grounding
terminal or lead on the dishwasher.
Power Cord Connections:
•
Use a pow
er cord with connections that comply with the National
Electrical Code, Section 422 and/or local codes and ordinances.
•
Rec
ommended cord length is 54" min. and 64" max.
•
A pow
er cord kit #BK500 is available for purchase from an authorized
parts dealer.
Direct Wire Connections:
•
Use flexible
, armored or nonmetallic sheathed, copper wire with
grounding wire that meets the wiring requirements for your local
codes and ordinances.
INST
ALLATION INSTRUCTIONS
IMPORTANT
:
•
This applianc
e should be installed only by a qualified Installer, plumber
or technician and in accordance with the manufacturer’s installation
instructions, electrical and plumbing national and local codes and
ordinances.
•
The dish
washer must be installed to allow for future removal from the
enclosure if service is required.
•
Each dishw
asher is tested at the factory and may contain some
residual water in the tub as a result of the test.
UNPACK DISHWASHER
IMPORTANT
: If you received a damaged dishwasher, you should
immediately contact Midea Customer Service.
WARNING
Suffoca
tion Hazard
•
To a
void danger of suffocation, keep plastic bag and
other packing material away from babies and children.
Do not use this bag in cribs, carriages and playpens.
The plastic bag could block nose and mouth and
prevent breathing. This bag is not a toy.
•
Failur
e to follow these instructions can result in death or
brain damage.
To Next Page
Loading...
Need help?
General
