14
Safety
Pr
ecautions
Installa
tion
Requirements
Installa
tion
Instructions
3. Extend the le
veling legs from the base of the dishwasher by the length
indicated in the following chart. Take into account any built-up flooring
which may need to be added to the rear foot adjustment.
NOTES:
•
If the floor was built up in f
or the front of the dishwasher, account
for this difference when adjusting the rear leveling legs.
•
Final lev
eling leg adjustments will be made following installation
into the opening.
a
a A
djus
t Leveling
Legs to Installation
Height
L
e
veling Leg Adjustment
Opening Height Fr
ont Legs Back Legs
34" 0 0
34
" 0
"
34
"
"
"
34
"
"
"
35"
" 1"
INST
ALL 90° ELBOW
1. Wr
ap the 90° elbow with thread seal tape.
NOTES:
•
Do not use plumber’
s putty.
•
To a
void damaging the water valve bracket and/or fitting, do not
over tighten the elbow.
To Next Page
Loading...
Need help?
General
