Cappuccino and milk froth
Using for the first time or after descaling
Before the coffee machine leaves the factory, the pipework is
completely pumped out. This also happens during the
descaling process. For this reason, water must be pumped
into the pipework before using the machine to make a
cappuccino or to froth milk for the first time or after descaling:
^ Place an empty cup under the Cappuccinatore spout.
^ Touch the sensor beside "Froth".
The Cappuccinatore will now draw water in for a while in
order to fill the pipework. A trickle of water will come out of
the Cappuccinatore spout.
^
Once the machine has stopped, start the "Froth" process
again.
After a while, steam will come out of the Cappuccinatore
spout and there will now be water in the system. You can now
prepare a cappuccino or froth milk.
Making coffee
24
To Next Page
Loading...
Need help?
General
