Machine front
^
Clean the front of the machine with a solution of hot water
and washing-up liquid applied with a damp cloth. Wipe
everything dry with a soft cloth.
Make sure that no water penetrates behind the display.
E-Cloth
A microfibre "E-Cloth" is available from the Miele UK Spare
Parts Department, or via the internet (depending on country),
which is suitable for cleaning surfaces such as stainless
steel, glass, plastic and chrome without the use of chemicals.
Avoid the following on all types of front:
– cleaning agents containing soda, ammonia, acids or
chlorides,
– solvent-based cleaning agents,
– cleaning agents containing descaling agents,
– dishwasher cleaner,
– abrasive cleaning agents, e.g. powder cleaners and cream
cleaners.
– hard, abrasive sponges, e.g. pot scourers and brushes or
sponges which have been previously used with abrasive
cleaning agents,
–
sharp, metal scrapers
When descaling the machine, wipe up any spillages or
splashes of descaling agent immediately.
To prevent the risk of scratches and damage to stainless
steel and aluminium surfaces, pay particular attention to
the following cleaning instructions.
Cleaning and care
63
To Next Page
Loading...
Need help?
General
