Display
You can adjust both the contrast and the brightness of the
display:
^
Touch the sensor beside "Settings".
Settings
ß User profile
ß Main menu
ß Display
^
Touch the sensor beside "Display".
^
Touch the sensor beside Contrast or Brightness and set the
level with the middle sensor on the right or left of the
display.
^ Touch the sensor beside "ok" to save the setting.
Buzzer tones
You can choose for an audible tone to sound each time a
sensor is touched.
^ Touch the sensor beside "Settings".
Settings
ß Main menu
ß Display
ß Buzzer tones
^
Touch the sensor beside "Buzzer tones".
You can now choose whether you want an audible tone to
sound each time a sensor is touched (touch the sensor
beside "On") or not (touch the sensor beside "Off").
If you select "On", you can then set the volume. The higher
the number, the louder the audible tone.
Settings: Customising your machine
47
To Next Page
Loading...
Need help?
General
