Plate warmer
You can connect a Miele EGW 4000-14 or EGW 4000-29
plate warmer to the coffee machine using a special
connection cable available as an optional accessory from
your Miele Dealer or the Miele Spare Parts Department.
Once the plate warmer is connected, you will need to "install"
the plate warmer in the "Settings" menu.
^
Touch the sensor beside "Settings".
Settings
ß Display
ß Buzzer tones
ß Plate warmer
^ Touch the sensor beside "Plate warmer".
There are three options:
Automatic
The plate warmer will switch on and off together with the
coffee machine. The plate warmer must be switched on with
the On/Off control.
If you have programmed the coffee machine to switch on at a
specific time, the plate warmer will always switch on approx.
30 minutes before the coffee machine is due to switch on so
that your cups are warmed up ready for your coffee!
On
You can switch the plate warmer on and off manually
whenever you want, independently of the coffee machine.
Off
The plate warmer will not switch on because the coffee
machine is not supplying it with any electricity. The coffee
machine is delivered with "Off" as the default setting.
Settings: Customising your machine
48
To Next Page
Loading...
Need help?
General
