Change
You can programme the machine so that it always reverts to
the Standard profile or so that it continues to operate using a
User profile you have set.
To set the profile to be used:
^
touch the sensor beside "Change".
You can now select one of the following:
Do not change
The machine will continue to operate using the User profile
you have selected until you select another User profile.
When switched on
Each time the machine is switched on it will automatically
select the Standard user profile regardless of which Profile
was set before the machine was last switched off.
After each use
The machine will automatically revert to the Standard User
profile each time a drink is dispensed.
^ Touch the sensor beside the setting of your choice, and
then touch the sensor beside "ok".
Selecting a User profile
To select a User profile:
^
Touch the sensor beside "Standard" in the main menu, and
then touch the sensor beside the Profile you wish to select.
(You can also select a User profile directly via the main
menu if this has been activated under the Settings:User
profile menu).
^
Then touch the sensor beside "ok".
Settings: Customising your machine
36
To Next Page
Loading...
Need help?
General
