Stainless steel fronts
The machine front is susceptible to scratches and abrasion.
Stainless steel surfaces can be cleaned using a Miele E-Cloth
or with a proprietary non-abrasive cleaning agent designed
specifically for use on stainless steel. N.B. Do not use
stainless steel cleaning agents on the controls.
To help prevent re-soiling, a conditioning agent
for stainless steel, (available from the Miele Spare
Parts Department or via the internet, depending
on country) can also be used. Follow the manufacturer's
instructions on the label.
Aluminium fronts
Aluminium is affected by the way that light falls on it, by the
surrounding environment and by the angle you observe it
from.
The surfaces and controls may suffer discolouration or
damage if soiling is left on for too long. Remove any
soiling straight away.
The machine front is susceptible to scratches and abrasion.
Avoid:
–
stainless steel cleaning agents.
Cleaning and care
64
To Next Page
Loading...
Need help?
General
