Frequently Asked Questions
159
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department. Time and money will be saved because a
service call will not be needed.
This guide may help you to find the reason for the fault, and how to correct it.
Problem Possible cause and solution
You cannot turn the ap-
pliance on.
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
correct fuse rating).
There may be a technical fault.
Disconnect the appliance from the power supply
for approx. 1minute:
– tripping the relevant circuit breaker or screwing
the fuse out completely, or
– tripping the ground fault circuit interrupter
(GFCI).
If the steam oven still will not turn on, contact a
qualified electrician or Miele Service.
The oven does not heat
up.
Demo mode is activated.
The steam oven can be operated, but the oven heat-
ing does not work.
Deactivate Demo mode (see "Settings – Show-
room Program").
The oven interior has been heated by a heating
drawer operating beneath it.
Open the door and let the oven cool down.
The fan can still be
heard after the appli-
ance has been turned
off.
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will turn itself off automatically after a while.
A humming sound can
be heard after switching
on the appliance, during
operation and after
turning off the appli-
ance.
This is not a fault. It is made by water being pumped
through the system.
To Next Page
Loading...
Need help?
General
