Water connection
182
– A non-return valve is not required.
– The water quality must conform to
the requirements for drinking water in
the country in which the appliance is
being installed.
– The water intake hose must be con-
nected to the drinking water supply
by a faucet with a ³/₄" threaded
union. If this is not present, one must
be installed by a suitably qualified
plumber.
– The faucet must be easily accessible
after the appliance has been in-
stalled.
– Only genuine original Miele hoses
can be used with this appliance.
Connecting the water supply
Danger of electrical shock!
Plumbing connections cannot be
made while the appliance is con-
nected to the electrical supply.
Disconnect the appliance from the
electrical supply.
Connect the stainless steel intake
hose to the water supply.
Ensure that the hose is installed cor-
rectly and that it is watertight.
The connection point is subject to wa-
ter pressure. Turn on the faucet slowly
and check for leaks. Correct the posi-
tion of the washer and union if appro-
priate.
To Next Page
Loading...
Need help?
General
