Settings
106
You can alter the dishwasher’s con-
trols to suit changing requirements by
adjusting the settings.
The settings can be altered at any
time.
Opening the settings menu
Switch the dishwasher on with the
sensor control if it is switched off.
Touch the sensor control “Further
programmes/settings”.
The first of the further programmes will
appear in the display.
Use the sensor controls to select
the Settings menu option and con-
firm with OK.
The first option in the Settings menu will
appear in the display.
For further information about the dis-
play functionality, see “Guide to the
appliance” chapter, “Display func-
tions” section.
Changing settings
Use the sensor controls to select
the menu option you want to change
and confirm your selection with OK.
Sub-menu options that have already
been selected will have a tick be-
side them.
Select the setting you want using the
sensor controls and confirm with
OK.
To exit a sub-menu again use the
Backsensor control.
The display will revert to the menu
above.
Closing the settings menu
Touch thesensor control.
The display will change to the menu.
To Next Page
Loading...
Need help?
General
