Operation
56
Interrupting a programme
A programme will be interrupted as
soon as the door is opened.
If the door is closed again, the pro-
gramme will continue from the point it
was at before the door was opened.
Risk of scalding due to hot wa-
ter.
During operation, water in the dish-
washer may be very hot.
During operation, only open the door
with extreme caution.
Cancelling or changing a pro-
gramme
If a programme is cancelled, import-
ant programme stages may be
missed.
A programme should only be can-
celled in the first few minutes of the
programme sequence.
If a programme has already started and
you wish to cancel it, proceed as fol-
lows:
Open the door.
Switch the dishwasher off using the
sensor control.
Confirm the query Switch appliance off
with OK.
If you would like to select another pro-
gramme:
Switch the dishwasher back on using
the sensor control.
If you have dispensed detergent
manually, check whether the deter-
gent compartment is still closed.
If the lid is already open, fill it with de-
tergent again and close the lid.
Select the programme you want, and
then start it by shutting the door.
The optical in-operation indicator light
comes on to show that a programme
sequence has been started.
To Next Page
Loading...
Need help?
General
