Miele G7360 SCVi - Consumption and Volume Settings

Settings
116
Consumption (EcoFeedback)
You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme, and the actual con-
sumption after the end of the pro-
gramme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
“Caring for the environment” chapter,
“EcoFeedback consumption ”display
section).
Display Consumption
 Select the Displaymenu option and
confirm with OK.
 Select the setting you want and con-
firm with OK.
Display Total consumption
 Select the Total consumptionmenu op-
tion and confirm with OK.
 You can display the values for Energy
and Water using the sensor con-
trols.
You can also reset the values for the
total consumption to 0.
 Select the Resetmenu option and
confirm with OK.
 Select the Yesmenu option and con-
firm with OK.
 Confirm the message with OK.
The values are now reset to 0.
Display brightness
You can set the display brightness to
one of seven different levels.