Miele G7360 SCVi User Manual

Settings
119
Heat accumulator
This dishwasher is equipped with a heat
accumulator (see “Caring for the envir-
onment” chapter, “Heat accumulator”
section).
SelectState
The heat accumulator function can be
switched off if you do not wish to use it.
 Select the Statemenu option.
 Select the setting you want and con-
firm with OK.
Empty manually
You can manually empty the heat accu-
mulator, e.g. for a longer period of ab-
sence, or before moving the appliance
to a new location.
 In doing so, please ensure that the
dishwasher is properly connected.
 Select the Empty manuallymenu op-
tion.
The process starts straight away.
Software version
You can call up the electronic software
version of your dishwasher for technical
support purposes.
Showroom prog.
For demonstration purposes only.
The dishwasher is equipped with a
demo mode for showroom use.
Factory default
You can reset all the appliance settings
and its network configuration to the
factory default settings.
WiFi module settings (where applicable)
have to be reset separately.
Appliance settings
You can use this menu option to reset
all dishwasher settings, except WiFi
module settings, to the factory default
settings.
Network configuration
You can use this menu option to reset
all WiFi module settings to the factory
default settings.
The network configuration should be re-
set whenever a dishwasher is being dis-
posed of or sold, or if a used dish-
washer is being put into operation. This
is the only way to ensure that all per-
sonal data has been removed and the
previous owner will no longer be able to
access the dishwasher.

Miele G7360 SCVi Specifications

General

Brand	Miele
Model	G7360 SCVi
Category	Dishwasher
Language	English