Fitting the FlexiClip runners
,
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
Each level is made up of two rails.
The FlexiClip telescopic runners fit on
the top rail of these two rails.
The FlexiClip runner with the Miele logo
is fitted on the right.
Do not extend the FlexiClip runners
when fitting them or taking them out.
If the FlexiClip runners are difficult to
pull out after fitting, you may need to
pull firmly on them once to release
them.
^
Hook the FlexiClip runner onto the
front of the top rail of a side runner
(1.) and then hold it at an angle in
towards the middle of the oven
compartment (2.).
^ Slide the FlexiClip runner at an angle
along the top rail as far as it will go.
^
Then swing it back to the side of the
oven cavity and secure it to the top
rail with an audible click.
Features
26
To Next Page
Loading...
Need help?
General
