Features
23
Side runners
Side runners for accessories are fitted
on either side of the oven cavity for
shelf levels.
The numbers for the shelf levels are
marked on the front frame.
Each level consists of two rails, one
above the other.
Accessories (e.g. the rack) can be used
on any level. They are pushed into the
oven between the two rails.
The FlexiClip runners (depending on
model) can be fitted on levels 1, 2 and
3. They are fitted on the upper rail.
The side runners can be removed (see
"Cleaning and care").
Baking tray, universal tray and rack
with non-tip safety notches
Baking tray HBB71:
Universal tray HUBB71:
Rack HBBR71:
These accessories are inserted into the
oven between the two rails of a side
runner.
Always position the rack with the
loading surface in the lower position.
These accessories have non-tip safety
notches fitted in the middle of their
short sides. The non-tip safety notches
prevent the trays from being pulled out
completely when you only wish to pull
them out partially.
If you are using the universal tray with
the rack on top, insert the tray between
the rails of the side runners and the rack
will automatically slide in above them.
The enamel parts have been treated
with the PerfectClean finish.
To Next Page
Loading...
Need help?
General
