Installing the oven
94
The oven must not be operated
until it has been correctly installed in
the cabinet carcase.
The oven requires a sufficient supply
of cool air for efficient operation.
Make sure that the supply of cool air
is not hindered in any way (e.g. by
fitting heat insulation strips in the
cabinet carcase).
Furthermore the required supply of
cool air must not be excessively
heated by other heat sources (e.g.
solid fuel stoves).
Before installation
Ensure that there is no power to the
socket.
Installing the oven
Connect the oven to the electrical
supply.
Lifting the oven by the door handle
could cause damage to the door.
Use the handle cut-outs on the side
of the housing to lift the appliance.
It is a good idea to remove the door
(see "Cleaning and care – Removing
the door") and to remove the
accessories before installing the
appliance. The oven is then easier to
push into the cabinet carcase and you
do not run the risk of lifting it by the
door handle.
Push the oven into the cabinet
carcase and align it.
Open the door, if you have not
removed it.
Secure the oven to the side walls of
the cabinet carcase using the screws
supplied.
Refit the door if necessary (see
"Cleaning and care – Fitting the
door").
To Next Page
Loading...
Need help?
General
