Clock/timer
46
Changing settings
Default settings are set in the oven
controls at the factory (see "Settings
overview").
You change a setting by changing its
status.
Turn the function selector to0.
Press continuously until flashes:
If you want to change another setting,
press or continuously until the
relevant digit appears.
Confirm with OK.
The setting is applied and the current
status appears, e.g.
To change the status:
Press or continuously until the
status you want is shown.
Confirm with OK.
The selected status is now saved and
the setting appears again.
To change further settings, proceed in
the same way.
If you do not want to change further
settings:
Wait approx. 15seconds until the
time of day appears.
The settings are retained in the event
of an interruption to the power supply.
To Next Page
Loading...
Need help?
General
