Tools required
For installation you will need a screw
driver, a cross-slotted screwdriver, a
spirit level and a square.
Building into a peninsular run
When built into a peninsular run the rear
of the building-in niche must be fitted
with a kitchen panel.
If the old appliance had a
different hinging system
If the old appliance had a different type
of hinging the furniture door can still be
used. Remove the old hinges from the
furniture carcase. They are no longer
required, because the furniture door is
now fitted to the appliance door. All
parts required should be in the acces-
sories pack.
If the furniture door has holes in it from
the old hinges, use the enclosed
self-adhesive strip to conceal the holes
as they are no longer required.
Installation
24
To Next Page
Loading...
Need help?
General
