Miele K 851 iD User Manual

^
Close the appliance door.
Fitting the furniture door
^ A gap of 8 mm must be set between
the appliance door and the fixing
bracket a.
^ Push fitting aids d up to the height of
the furniture door: The lower edge "X"
of the fitting aids must be at the same
height as the upper edge of the
furniture door being fitted, see - on
the diagram.
^
Undo nuts b, and take fixing bracket
c off together with the fitting aids.
^ Using a pencil, mark a line down the
centre of the inside of the furniture
door.
^ Using fitting aids a hang the fixing
bracket on the inside side of the
furniture door. Align the fixing bracket
centrally.
^ Attach the fixing bracket securely
using at least 6 short 4 x 14 mm chip
board screws b. (On cassette doors
only use 4 screws on the edges).
^
Pull the fitting aids upwards to
remove them c.
^
Turn them round and insert them right
into the middle slot on fixing
bracket d.
Building in the appliance
30

Miele K 851 iD Specifications

General

Category	Refrigerator
Model	K 851 iD
Appliance placement	Built-in
Energy Efficiency Class	A++
Noise Level	38 dB
Door hinge	Right
Refrigerant	R600a
Climate class	SN-T
Fridge interior light	Yes
Lamp type	LED
Number of shelves/baskets	4
Number of vegetable drawers	2
Door balconies	3
Egg balcony	Yes
Number of Doors	1
Adjustable Shelves	Yes
Door Open Alarm	Yes
Color	White
Type	Built-in
Fridge gross capacity	279 liters
Defrost System	Automatic

Summary

Description of the appliance

Warning and safety instructions

Correct usage and technical safety

Covers the appliance's intended domestic use and critical technical safety aspects related to coolant and potential hazards.

Electrical safety and mains connection

Ensures safe electrical connection and operation, covering mains supply compatibility, earthing, and avoiding extension leads.

Appliance operation and maintenance safety

Details safety precautions for appliance operation and maintenance, including avoiding specific cleaning agents, ensuring ventilation, and climate range compliance.

Disposal of old appliances safety

The correct temperature

Temperature selection and display

Explains how to set and read the internal temperature using the dial and display, and factors affecting temperature.

Super cool and dynamic cooling

Super cool function details

Details the Super cool function for rapid temperature reduction, its recommended uses, and how to switch it on/off.

Dynamic cooling function details

Explains the Dynamic cooling feature for even temperature distribution and when it should be activated or deactivated.

Storing food

Utilizing temperature zones for storage

Chilling and storing food

Important storage notes

Cleaning and care

Interior and accessory cleaning

Problem solving guide

Cooling performance issues

Diagnosing and fixing issues where the appliance is not cooling adequately or is too cold.

Frequent or long switching cycles

Troubleshooting reasons for the appliance switching on too frequently or running for extended periods.

Display and interior light issues

Resolving problems with the temperature display not showing or flashing, and the interior light not working.

Wet appliance floor cause

Electrical connection

General electrical connection guidelines

UK plug and fuse replacement

Mandatory earthing requirement

Crucial warning emphasizing that the appliance must be properly earthed for safety.

Installation

Location and climate range selection

Ventilation requirements for installation

Building in dimensions

Building in the appliance

Aligning the housing unit

Appliance insertion and securing

Fitting the furniture door

Instructions for attaching the furniture door to the appliance, including marking, hanging, and securing the bracket.

Adjusting furniture door alignment

Securing the appliance to housing

Final steps to securely fix the appliance to the housing unit at the top and bottom, including cover strips.