Operation
52
Starting the programme
Press the Start/Stopbutton.
The LED for the Start/Stopbutton will light up and the LED for the
button will go out.
Once it has been started, a programme can no longer be changed.
A running programme can either be interrupted (see “Interrupting a
programme”) or cancelled (see “Cancelling a programme”).
Programme
sequence
indicator
After the start of a programme, the wash phase description and, for
10seconds, Programme start are shown in the display.
During the programme sequence, the arrow buttons and can be
used to switch between the wash phase, the set temperature and the
actual temperature in the second line of the display.
The time remaining is shown in the third line of the display.
Universal
Main wash
Duration
G
Min
23
To Next Page
Need help?
General
