Further settings
91
Factory default setting
The Factory default setting can be used to reset all changed
parameters in the commercial dishwasher back to their factory default
settings or just values that have been changed for programmes.
Select the Further settings menu.
Select Factory default and press OK to open the relevant menu.
The following options are available:
Reset
No
Programme settings only
,
;
(
- No
Altered parameters will not be reset to their default settings.
- Programme settings only
Only settings that have been altered in programmes will be reset to
their factory defaults.
- All settings
All parameters that have been altered on the commercial
dishwasher will be reset to their factory defaults.
Select the desired option and confirm your selection with the
OKbutton.
Selecting Programme settings only or All settings restarts the
commercial dishwasher. After it has restarted, you will be prompted
to re-enter basic parameters such as the language, date, time, water
hardness, etc.
Enter the parameters displayed such as language, date, time, etc.
Your selection will be saved and the last programme used will appear
in the display.
To Next Page
Loading...
Need help?
General
