Additional functions
57
Drying assistance
To achieve better drying results, the dishwasher door will
automatically open a few centimetres at the end of the programme.
This function cannot be activated for all programmes (see
“Programme chart”).
Drying assistance can be activated or deactivated for the selected
programme, even if it is switched on or off permanently under
“Settings , Drying”.The setting adopted will then be applied once for
the programme selected and will go out at the end of the programme.
Switch the dishwasher on with the button.
Select the programme you require (see “Operation, Selecting a
programme”). The Start/Stop button's LED will flash.
Press the OK button.
If Delay start has been activated under “Settings , Delay start”, the
following will appear in the Selection menu:
Selection
Drying assistance
Delay start
Select Drying assistance and confirm your choice with theOK
button.
If delay start has been deactivated under “Settings , Delay start”, the
options for drying assistance will appear immediately.
- No
Drying assistance is deactivated for the selected programme.
- Yes
Drying assistance is activated for the selected programme.
The opposite of the setting which has been adopted under “Settings
, Drying” will appear as an option in the display. Pressing the OK
button will adopt the option.
To Next Page
Loading...
Need help?
General
