Miele PG 8059 - Entering the PIN Code

Further settings
75
Entering the
PIN code
If in the Release menu you have selected Block or if you have set the
Further settings menu up for access via a PIN code, you have to enter
the PIN code.
Settings within the Further settings menu can then only be changed
by people with administrative rights.
The PIN code is set at the factory to 8 0 0 0 if access in Further
settings is blocked.
The following PIN-entry screen will appear in the display, for example:
Enter code
0 0 0 0
 Use the  and arrow buttons to enter the numerical values, and
confirm each entry with the OKbutton.
Each press of the OKbutton takes the highlighting to the next input
position automatically.
Each entered digit is replaced by an asterisk (*).
The protected settings are unlocked once all digits have been
correctly entered.
If an incorrect PIN code is entered, the following message will appear
in the display:
K
OK
Wrong code entered
 Press the OKbutton to acknowledge the message.
The display will then revert to the input menu.