Cleaning the spray arms
Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked
regularly (approx. every4-6months).
^
Turn the dishwasher off.
Remove the spray arms as follows:
^
Pull out the cutlery tray (if present).
^ Push the upper spray arm up to
engage the inner ratchet and
unscrew the spray arm.
^
Lift the middle spray arm up a to
engage the ratchet and unscrew the
spray arm b.
^
Remove the lower basket.
^ Pull the lower spray arm firmly
upwards to remove.
^
Use a pointed object to push the
food particles in the spray arm jets
into the spray arm.
^
Rinse the spray arms thoroughly
under running water.
^
Replace the spray arms and check
that they rotate freely.
Cleaning and care
48
To Next Page
Loading...
Need help?
General
