Optimizing Standby
A few minutes after the last button is
pressed or a few minutes after the end
of the program the commercial
dishwasher will switch to Standby mode
to save energy. The display and the
indicator lights are switched off and
only the Start/Stop indicator light
flashes slowly.
The commercial dishwasher will not
switch to Standby during a program.
If you do not turn the commercial
dishwasher off when the program has
ended, it will switch off automatically
after several minutes in Standby.
You can also deactivate the Optimizing
standby function. The display and the
indicator lights do not go out, and the
commercial dishwasher turns off 6
hours after the end of the program.
This results in higher energy
consumption.
^ Select the desired setting and press
the centre button to confirm.
If Refill salt, Refill rinse aid or a fault
is displayed or while a program is
running, the commercial dishwasher
will not switch to Standby mode.
Settings menu
75
To Next Page
Loading...
Need help?
General
