Rinse aid
For best results the rinse aid dosage
can be adjusted.
The dosage can be set between 0-6 ml.
The factory setting is 3 ml of rinse aid.
If the dishes are spotty:
–
Use a higher rinse aid setting.
If the dishes are cloudy or streaky:
–
Use a lower rinse aid setting.
^
Select the desired amount of rinse
aid and press the centre button to
confirm.
AutoOpen
To improve drying, the door
automatically opens a little at the end of
a program, except for Rinse & Hold,
ProSpeed, Glass no rinse aid (see
Program guide).
With the Universal, Pots & Pants and
Glasses programs, AutoOpen can only
be activated by selecting Extra drying
(see Additional functions - Extra
drying).
You can also deactivate this function.
^
Select the desired setting and press
the centre button to confirm.
,
If you have deactivated the
AutoOpen function but would still
like to open the door at the end of a
program, make sure that you open
the door completely. Otherwise
steam from the commercial
dishwasher could damage the edge
of the countertop because the fan is
no longer running.
Settings menu
74
To Next Page
Loading...
Need help?
General
