You can easily resolve many of the minor problems you may encounter during
everyday use. This will save you time and money because you do not have to call
Miele Service.
With the aid of the following guide, the cause of a problem can be found and
eliminated. However, please note:
,
Repairs must only be carried out by Miele Service. Unauthorized repairs
could cause personal injury or damage to the machine.
Technical faults
Problem Possible cause Solution
When the commercial
dishwasher is turned
on with the - button,
the display stays dark
and the Start/Stop
indicator does not
flash.
The commercial
dishwasher is not
plugged in.
Insert the plug.
The circuit breaker has
tripped.
Reset the circuit breaker.
(See data plate for the
correct fuse rating).
The commercial
dishwasher stops
during a program.
The circuit breaker has
tripped.
– Reset the circuit breaker
(see data plate for the
correct fuse rating).
–
If the circuit breaker trips
again, contact Miele Ser
-
vice.
Frequently asked questions
49
To Next Page
Loading...
Need help?
General
