4. Selecting programme settings
28
Selecting a load
To enable load specific dispensing,
you can specify the load for some pro-
grammes.
Touch the Weight sensor control.
Enter a valid value for the load quant-
ity.
The display will change to the Overview
menu.
Selecting the temperature
You can alter the preset temperature
of a wash programme.
Touch the Temperature sensor control.
Select the desired temperature.
The display will change to the Overview
menu.
Selecting a spin speed
You can alter the preset spin speed of
a wash programme.
Touch the Spin speed sensor control.
Select the spin speed you want.
The display will change to the Overview
menu.
Selecting Extras
You can select Extras for some wash
programmes.
Touch the Extras sensor control.
Select one or more Extras.
Confirm with the OK sensor control.
The display will change to the Overview
menu.
See “Extras” for further information.
Activating CapDosing
You can use CapDosing for some
wash programmes.
Touch the CapDosing sensor control.
The types of capsules which can be
used with the programme will appear in
the display.
Select the type of capsule you want.
CapDosing is now active.
The display will change to the Overview
menu.
See “CapDosing” under “5.Adding
detergent” for more information.