EasyManuals Logo
Home>Miele>Washer>PWM 908

Miele PWM 908 User Manual

Miele PWM 908
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
Extras
51
You can add Extras to the wash pro-
grammes.
Not all Extras can be selected with
every programme. If an Extra is not lis-
ted, it is not permitted for use with the
wash programme in question.
Selecting Extras
Touch the Extras sensor control.
Select one or more of the Extras
available.
Confirm with the OK sensor control if
several Extras are available.
Pre-wash
A Pre-wash can be added for heavily
soiled laundry. Coarse soiling is
loosened and removed before the main
wash.
Pre-rinse
The laundry is rinsed before the main
wash to remove larger quantities of soil-
ing, e.g. dust, sand.
Rinse plus
An extra rinse can be activated to
achieve a better wash result.
Soak
For heavily soiled and stained items
with protein stains. The soak duration is
10minutes.
Intensive
For hard-wearing laundry that is very
heavily soiled. Cleaning efficiency is in-
creased through more intense mechan-
ical action and the application of more
heat energy.
Water plus
The water level in the main wash and
the rinses will be increased.
Pre-ironing
In order to reduce creasing, the laundry
undergoes a smoothing process at the
end of the programme. Reducing the
maximum load by 50% will achieve a
better result. Small loads achieve a bet-
ter result.
The textiles must be suitable for drying
in a tumble dryer and suitable for
ironing .
Rinse hold
The laundry is not spun after the final
rinse and remains in the rinse water.
This helps prevent creasing if the laun-
dry is not going to be removed from the
drum immediately after the end of the
programme.
Starch stop
Water is drained out of the machine be-
fore the last rinse and the programme
stops. The prepared starch is added
directly to the drum. The programme is
continued with the Start/Stop sensor
control.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 908 and is the answer not in the manual?

Miele PWM 908 Specifications

General IconGeneral
Door hingeRight
Water fillCold, Hot
Drum volume73 L
Control typeTouch
Loading typeFront-load
CertificationCE, VDE-EMV, VDE, WEEE, IPX4
Product colorSilver
Built-in displayYes
Custom panel-ready-
Door opening angle167 °
Appliance placementFreestanding
Package depth768 mm
Package width660 mm
Package height940 mm
Package weight107000 g
Current10 A
Connected load5500 W
AC input voltage400 V
AC input frequency50 Hz
Water consumption per cycle- L
Energy consumption washing per cycle- kWh
Drum capacity8 kg
Delay start (max)96 h
Spin-drying classA
Maximum spin speed- RPM
Noise level (spin)70 dB
Noise level (wash)46 dB
Weight and Dimensions IconWeight and Dimensions
Depth714 mm
Width605 mm
Height850 mm
Weight103000 g

Related product manuals