Miele PWM 908 User Manual

Problem solving guide
65
The door will not open
Problem Cause and remedy
The door cannot be
pulled open during a
programme.
The door is locked during the wash programme.
 Touch the Start/Stop sensor control.
 Select Cancel programme or Add laundry.
The door will unlock and you will be able to pull it
open.
There is still water in the drum and the machine is un-
able to drain.
 Clean the drainage system as described under
“Opening the door in the event of a blocked drain
outlet and/or power cut”.
At the end of a pro-
gramme or when a pro-
gramme is cancelled,
the following appears in
the display:
Cooling down or Comfort
cooling.
To protect the user against scalding, the door cannot
be opened if the suds temperature is higher than
55°C.
 Wait until the temperature in the drum has de-
creased and the message has gone out in the dis-
play.
The following appears
in the display:
The door lock is jammed.
Call Service.
The door lock has jammed.
 Call Miele Service.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g