Miele PWM 908 User Manual

5. Adding detergent
30
Adding fabric conditioner or liquid
starch separately
 Select the Separate rinse programme.
 Change the spin speed if necessary.
 Add fabric conditioner or liquid starch
to the  compartment. Do not ex-
ceed the maximum level mark.
 Touch the Start/Stop sensor.
It will be automatically dispensed in the
final rinse. At the end of the wash pro-
gramme a small amount of water re-
mains in the  compartment.
Adding starch separately
 Prepare the starch solution in accord-
ance with the manufacturer's instruc-
tions on the packaging.
 Select the Starch programme.
 Add the prepared starch to compart-
ment .
 Touch the Start/Stop sensor.
Tip: If starching separately or automat-
ically, thoroughly clean the dispenser
compartment, especially the siphon
tube, regularly.
Dye removers and dyes
 Damage due to colour run/dye
removers.
Colour run and dye removers can
cause corrosion in the washing ma-
chine.
Do not use colour run or dye re-
movers in this washing machine.
Only use dyes suitable for use in a
washing machine. The manufacturer's
instructions on the packaging must be
observed.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g