EasyManuals Logo
Home>Miele>Washer>PWM 908

Miele PWM 908 User Manual

Miele PWM 908
104 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #95 background imageLoading...
Page #95 background image
Supervisor level
95
External applications
Empty sensor
External hardware is connected via the
Miele XCI box.
A siphon contact can be used to de-
tect whether external detergent con-
tainers are empty. A message appears
if a container is empty.
Off (factory default)
Normally open contact
The siphons are equipped with a nor-
mally open contact.
Normally closed contact
The siphons are equipped with a nor-
mally closed contact.
Early warning counter
External hardware is connected via the
Miele XCI box.
An internal counter reports when an
external dispenser container is almost
empty. The counter in question then
has to be reset.
Peak load signal
External hardware is connected via the
Miele XCI box.
The peak-load negotiation function
enables the washing machine to be
connected to an energy management
system. When a signal is registered,
the washing machine's heater is
switched off for a short period.
The washing machine may only be op-
erated with a peak-load system if this
system is connected to the washing
machine via the Miele XCI box.
No function (factory default)
Peak load with 230V
Peak load with 0V
Peak load prevention
The peak-load negotiation function
can be deactivated with disinfection
programmes. When a signal is re-
gistered, the washing machine's
heater is not switched off.
Factory default: Off

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele PWM 908 and is the answer not in the manual?

Miele PWM 908 Specifications

General IconGeneral
Door hingeRight
Water fillCold, Hot
Drum volume73 L
Control typeTouch
Loading typeFront-load
CertificationCE, VDE-EMV, VDE, WEEE, IPX4
Product colorSilver
Built-in displayYes
Custom panel-ready-
Door opening angle167 °
Appliance placementFreestanding
Package depth768 mm
Package width660 mm
Package height940 mm
Package weight107000 g
Current10 A
Connected load5500 W
AC input voltage400 V
AC input frequency50 Hz
Water consumption per cycle- L
Energy consumption washing per cycle- kWh
Drum capacity8 kg
Delay start (max)96 h
Spin-drying classA
Maximum spin speed- RPM
Noise level (spin)70 dB
Noise level (wash)46 dB
Weight and Dimensions IconWeight and Dimensions
Depth714 mm
Width605 mm
Height850 mm
Weight103000 g

Related product manuals