Miele PWM 908 User Manual

Changing the programme sequence
53
A programme cannot be cancelled or
changed when operating a payment
system.
Changing a programme
A programme can no longer be
changed once it has been successfully
started.
You will need to cancel the current pro-
gramme before you can select a new
one.
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
 Touch the Start/Stop sensor control.
The following will appear in the display:
Cancel programme?
 Select yes.
The following will appear in the display:
Programme cancelled.
The suds will be pumped away.
 Wait until the door unlocks.
 Pull open the door.
 Remove the laundry.
Switching on the washing ma-
chine after an interruption to
the power supply
If the washing machine is switched off
with the button during a wash pro-
gramme, the programme will be inter-
rupted.
 Switch the washing machine back on
with the button.
 Note the message in the display.
 Touch the Start/Stopsensor.
The programme will also be interrupted
if power is interrupted by a power cut.
 When power is resumed, confirm the
message in the display with OK.
 Touch the Start/Stopsensor.
The programme continues.

Miele PWM 908 Specifications

General

Door hinge	Right
Water fill	Cold, Hot
Drum volume	73 L
Control type	Touch
Loading type	Front-load
Certification	CE, VDE-EMV, VDE, WEEE, IPX4
Product color	Silver
Built-in display	Yes
Custom panel-ready	-
Door opening angle	167 °
Appliance placement	Freestanding
Package depth	768 mm
Package width	660 mm
Package height	940 mm
Package weight	107000 g
Current	10 A
Connected load	5500 W
AC input voltage	400 V
AC input frequency	50 Hz
Water consumption per cycle	- L
Energy consumption washing per cycle	- kWh
Drum capacity	8 kg
Delay start (max)	96 h
Spin-drying class	A
Maximum spin speed	- RPM
Noise level (spin)	70 dB
Noise level (wash)	46 dB

Weight and Dimensions

Depth	714 mm
Width	605 mm
Height	850 mm
Weight	103000 g