Heating up the oven for the
first time and rinsing the steam
injection system
New ovens can give off an unpleasant
smell on first use. Heating up the oven
for at least 1 hour with nothing in it will
get rid of this smell.
It is a good idea to rinse the steam
injection system at the same time.
Ensure that the kitchen is well
ventilated while the appliance is
being heated up for the first time.
Close doors to other rooms to
prevent the smell spreading
throughout the house.
^ Remove any protective wrapping and
sticky labels from the oven.
^ Before heating up the oven, it is a
good idea to wipe the interior out with
a damp cloth first. This way any dust
or bits of packaging that may have
accumulated in the oven
compartment during storage and
unpacking will be removed.
^
Fit the FlexiClip telescopic runners
(available to order) to the shelf
runners and insert all trays and the
rack.
^
Place a container with approx. 150 ml
fresh tap water in the oven.
^
Switch the oven on.
^
Select the Moisture Plus d function.
The lighting will come on.
Aut§ will appear in the display and the
triangle V will flash under *:
Aut§
*
;
^
Touch the OK sensor.
The recommended temperature will
appear in the display with the triangle
V flashing under 6:
i60
°C
6
V
^ Use the rotary selector to set the
maximum possible temperature
(250 °C).
^
Touch OK or wait approx.
15 seconds.
The setting will then be automatically
saved.
Using for the first time
33
To Next Page
Loading...
Need help?
General
