Using residual heat
^
The temperature in cooking
programmes using temperatures
above 140 °C which take longer than
30 minutes to cook can be turned
down to the lowest possible
temperature about 5 minutes before
the end of cooking in order to make
use of residual heat. The cooling fan
and, depending on cooking function,
the hot air fan will remain on. Do not
switch the oven off (see "Safety
instructions").
^
If you wish to clean catalytic
enamelled parts of the oven, it is best
to do so immediately after a cooking
programme. The residual heat in the
oven will help reduce the amount of
energy required. Before cleaning any
catalytic parts of the oven, ensure
you clean the door and PerfectClean
surfaces first to avoid soiling baking
on.
Settings
^
Switch the clock display off if you
wish to reduce energy usage (see
"Settings").
^
Set the oven lighting so that it
switches off automatically during a
programme after 15 seconds. It can
be switched on again at any time by
touching I.
Energy save mode
^
The oven will switch itself off
automatically to save energy if a
programme is not being run and
controls have not been operated.
The time of day will appear in the
display or the display will remain dark
(see "Settings").
Tips on saving energy
47
To Next Page
Loading...
Need help?
General
