Cleaning the porthole glass
^
From time to time you should also
clean ...
–
the door glass
on the inside using a
mild detergent or soap and water.
–
the metal cap
on the inside of the
door glass with a suitable proprietary
stainless steel cleaning agent
following the manufacturer's
instructions on the packaging.
^
Wipe dry using a soft cloth.
Cleaning the filter in the water
inlet
The machine has a filter to protect the
water inlet valve.
The accessible filter in the union in the
open end of the inlet hose should be
checked every six months, or more
often if there are frequent interruptions
to the external water supply.
^
First turn off the stopcock and then
unscrew the threaded union
connecting the free end of the inlet
hose to the stopcock.
^ Remove the rubber seal 1 from the
recess.
^ Hold the free end of the inlet hose
upside down. The plastic filter 2 will
fall out.
^ Clean the plastic filter.
^
Replace the filter and seal and
reconnect the hose.
Turn on the stopcock and check the
connection is watertight. If water leaks,
tighten the connection.
Never forget to put the filter back in
place after cleaning.
Cleaning and care
48
To Next Page
Loading...
Need help?
General
