Lock X
The system lock prevents your
machine being used without your
knowledge.
When the system lock has been
activated, you have to enter a code
after switching the machine on.
Otherwise the machine cannot be
operated.
To activate the lock
C Back A
X
Activate
^ Select
Activate
and confirm your
selection.
^ The display will now request that a
code is entered. The code is 125 and
cannot be altered.
To enter the lock code
The code is: 125
0
__
Enter code
^
Use the + button to enter the first
number. Confirm your selection of
this number by pressing the OK
button. Now set the second number.
^
Repeat the process until all three
numbers have been entered.
^
After the last number has been
entered, press the OK button.
Yes
125
No
Confirm code
^
Confirm the code with the OK button
or if you want to correct a mistake,
press the – button.
^
The lock will now be activated when
the machine is switched off.
To unlock the washer-dryer
When the machine is switched on
again, the display will request the lock
code.
^ Enter lock code 125 as described
above and confirm the entry.
W
Entry OK
Lock deactivated
The machine is now unlocked.
To deactivate the lock
Proceed as for activating the lock.
81
Settings menu J
To Next Page
Loading...
Need help?
General
