Miele WWR860WPS User Manual

Settings
106
SmartGrid
The SmartGrid setting is only visible if
the Miele@home setting is set up and
activated.
You can use this function to set your
tumble dryer to start automatically
based on an external signal within a
certain time period.
Activating SmartGrid gives the Timer
sensor a new function. Use the Timer
button to set SmartStart. The tumble
dryer will then start within the time
period specified by you when it receives
an external signal.
If a signal has not been received by the
latest start time set, the tumble dryer
will start automatically (see “Timer”).
SmartGrid is deactivated as standard.
Remote control
The Remote control setting is only vis-
ible if the Miele@home setting is set up
and activated.
Once the Miele app has been installed
on your mobile device, you can check
the status of your tumble dryer from
anywhere and start it remotely. You
can also control it remotely via the
MobileStart programme.
You can switch off the Remote control
setting if you do not want to operate the
tumble dryer with your mobile device.
If Remote control is not switched on, the
app can still be used to cancel the pro-
gramme.
Use the Timer sensor control to set a
timeframe within which you want to
start the tumble dryer and start the
timer (see “Timer/SmartStart”).
The tumble dryer will then start within
the timeframe specified when it receives
your signal.
If it has not received a start signal by
the latest start time set, the tumble
dryer will start automatically.
Remote control is activated as stand-
ard.

Miele WWR860WPS Specifications

General

Appliance placement	Freestanding
Drying system	Heat pump
Drying class	A
Color	White
Delay start	Yes
Child lock	Yes
Loading type	Front load
Width	596 mm
Depth	643 mm
Height	850 mm