Miele WWR860WPS User Manual

Timer
53
SmartStart
The SmartStart function lets you
define a time period during which your
tumble dryer will start automatically.
The appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity tariff
is particularly economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
1minute and 24 hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying pro-
gramme.
Setting the time period
If you have activated the SmartGrid
function in the settings, SmartStart or
SmartFinish will appear in the display
instead of Start at or Finish at when
you touch the Timer sensor control
(see “Settings – SmartGrid”).
The procedure is the same as for set-
ting the time for the timer.
 Now set the time you want and con-
firm with the OK sensor control.
 Touch the Start/Stop sensor control
to start the drying programme with
SmartStart.
The selected programme will start auto-
matically, as soon as the energy sup-
plier has sent the signal, or the latest
calculated start time has been reached.
The procedure for changing or delet-
ing the SmartStartfunction is the
same as described in “Changing the
timer” and “Deleting the timer”.

Miele WWR860WPS Specifications

General

Appliance placement	Freestanding
Drying system	Heat pump
Drying class	A
Color	White
Delay start	Yes
Child lock	Yes
Loading type	Front load
Width	596 mm
Depth	643 mm
Height	850 mm