Miele WWR860WPS User Manual

Cleaning and care
64
Cleaning the plinth filter
Clean the plinth filter when the pro-
gramme running time is longer than
usual or if the following message lights
up in the display: Clean the fluff and
plinth filters. See the operating instruction
manual for more information.
 To clear the message, confirm with
OK.
Removing the plinth filter
 Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
 Pull the plinth filter out by the handle.
The right-hand guide pin comes out
when the plinth filter is removed. The
guide pin prevents the access panel
from closing without the plinth filter.
Cleaning the plinth filter
 Pull the handle out of the plinth filter.
 Clean the plinth filter carefully and
thoroughly under running water.

Miele WWR860WPS Specifications

General

Appliance placement	Freestanding
Drying system	Heat pump
Drying class	A
Color	White
Delay start	Yes
Child lock	Yes
Loading type	Front load
Width	596 mm
Depth	643 mm
Height	850 mm