Miele WWR860WPS User Manual

Before using for the first time
25
Installation
Before using the appliance for the
first time, check that you have fol-
lowed all the instructions under “In-
stallation”.
Read these operating instructions,
paying particular attention to the in-
formation provided under “Installa-
tion”.
Removing the protective foil and
stickers
 Remove:
- Any protective film from the door
- Any stickers from the front and the lid
Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.
Downtime after installation
 Damage to the tumble dryer by
switching it on too soon.
This can damage the heat pump.
After setting up the tumble dryer wait
for at least one hour before switching
it on.
Miele@home
Your tumble dryer is equipped with an
integrated WiFi module.
In order to use it you need:
- a WiFi network
- the Miele app
- a Miele user account. The user ac-
count can be created via the Miele
app.
The Miele app will guide you as you
connect your tumble dryer to your
home WiFi network.
Once your tumble dryer is connected to
your WiFi network you can use the app,
for example, to carry the following
activities:
- Controlling your tumble dryer re-
motely
- Calling up information on the operat-
ing status of your tumble dryer
- Calling up information on the pro-
gramme sequence of your tumble
dryer
Connecting your tumble dryer to your
WiFi network will increase energy con-
sumption, even when the tumble dryer
is switched off.
Before installing the tumble dryer in
its final location, ensure the signal
strength is sufficient for your WiFi
network.

Miele WWR860WPS Specifications

General

Appliance placement	Freestanding
Drying system	Heat pump
Drying class	A
Color	White
Delay start	Yes
Child lock	Yes
Loading type	Front load
Width	596 mm
Depth	643 mm
Height	850 mm