Operating the tumble dryer
20
Control panel
a
sensor control
Takes you back one level in the menu.
b
Touch display
c
Start/Stop sensor
Touching the Start/Stop sensor starts the selected programme or cancels a
programme that has already been started. The sensor flashes slowly as soon as
it is possible for a programme to be started and then lights up constantly after
the programme has started.
d
Optical interface
This is used by the Service department as a transmission point.
e
button
For switching the tumble dryer on and off. The tumble dryer switches off auto-
matically to save energy. This occurs 15minutes after the end of the pro-
gramme/anti-crease phase, or after being switched on if no further selection is
made.
Touch display and sensors
The and Start/Stop sensors and the sensors in the display react to finger tip
contact.
The touch display can be scratched by pointed or sharp objects, e.g. pens.
Only touch the display with your fingers.
To Next Page
Loading...
Need help?
General
