Miele WWR860WPS User Manual

6. End of programme - unload the drum
38
End of programme
The programme is finished when Finish/
Anti-crease appears in the display. The
Start/Stop sensor will no longer light up.
The dryer will switch off automatically
15minutes after the end of the Anti-
crease phase (with programmes without
an Anti-crease phase it will switch off
15minutes after the end of the pro-
gramme).
Unloading the drum
Only open the door when the drying
process has finished. Otherwise, the
laundry will not be properly dried
through and cooled down.
 Pull the door open at the side with
the orange marker.
 Remove the laundry.
Items left in the dryer could be dam-
aged by overdrying when the dryer is
used the next time.
Always remove all items from the
drum.
 Touch the  sensor to switch the
tumble dryer off.
 Remove the fluff from the 2 fluff filters
in the door opening: see “Cleaning
and care – Fluff filters”.
 Shut the door with a gentle swing.
 Empty the condensed water con-
tainer.
We recommend that you drain the con-
densed water externally through the
drain hose when drying a full load using
the Cottons and Cottons  pro-
grammes. This will avoid having to
empty the condensed water container
during the programme.
Drum lighting
When you open the door of the tumble
dryer, the drum is illuminated along with
the area immediately in front of the
dryer. This prevents you from accident-
ally leaving behind any items in the
drum or in your laundry basket.
The drum lighting will go out automatic-
ally to save energy.
Tip: To switch the lighting on again,
open the pull-down menu from the
overview menu and then touch the 
sensor.

Miele WWR860WPS Specifications

General

Appliance placement	Freestanding
Drying system	Heat pump
Drying class	A
Color	White
Delay start	Yes
Child lock	Yes
Loading type	Front load
Width	596 mm
Depth	643 mm
Height	850 mm

Summary

Warning and Safety Instructions

Correct Application

Safety with Children

Guidelines for children's supervision and safe interaction with the appliance.

Technical and Electrical Safety

Covers electrical connections, earthing, and safe connection practices.

Correct Use and Fire Prevention

Proper operation and textiles to avoid due to fire risk.

Before Using for the First Time

Initial Setup and Downtime

Covers initial checks, removing protective materials, and post-installation downtime.

Miele@home WiFi Connection

Cleaning and Care

Fluff Filter Cleaning

Detailed instructions for cleaning the fluff filters in the door opening.

Plinth Filter Maintenance

Steps for removing, cleaning, and refitting the plinth filter.

Problem Solving Guide

Fault Messages and Remedies

Explains common error messages and their solutions.

Drying Result Issues

Troubleshooting for insufficient drying, smells, and static electricity.

Cycle Duration and General Problems

Installation

Levelling and Ventilation Requirements

External Water Drainage Setup

Changing Door Hinging

Electrical Connection Guidelines

Critical information on safe electrical hookup, supply, and regulations.