4
Pellerin Milnor Corporation
1 Machine Description and Identification
BNUUUF02 / 2021442
BNUUUF02 0000369288 A.6 10/25/21 9:27 AM Released
1.1 About This Manual and Your Milnor® Machine
BNUUUF02.C01 0000369287 A.5 A.6 A.9 10/14/21 8:55 AM Released
This manual applies to two or more models that share the mechanical characteristics stated below.
If you received this manual with your machine, your machine is one of the applicable models.
However, before using this manual, verify that your machine does have these characteristics.
1.1.1 Description
BNUUUF02.C02 0000369286 A.5 A.6 A.35 11/16/21 8:39 AM Released
Washer-extractors wash linen using water and non-volatile chemicals then remove excess water
by centrifugal force. This washer-extractor is the mechanical type described below.
_M5K, _M7K A machine represented by one of these partial model numbers is a bottom-sus-
pended (rubber springs), hydraulic tilt-to-load and unload washer-extractor with grease bear-
ings and a mechanical (disc) brake. The capacity can be 275 lb (125 kg) to 700 lb (318 kg)
depending on model.
1.1.2 Machine Identification
BNUUUF02.R01 0000369284 A.5 A.6 A.9 10/25/21 9:22 AM Released
Machine Data Plate — Find the model number and other data for your machine on the ma-
chine data plate affixed to the machine and described below.
Figure 1. Machine Data Plate
View of Data Plate (English text shown)
Legend
1. Model number.
2. Data that uniquely identifies your
machine
3. Cylinder maximum rotation speed
in revolutions per minute, if
applicable
4. Cylinder volume in the units of
measure shown, if applicable
5. Piped utility requirements
6. Hydraulic oil pressure, if
applicable
7. Electrical requirements
8. Part number for multi-unit ma-
chine, if applicable.
To Next Page
Loading...
Need help?
General
