Pellerin Milnor Corporation 19
Table 2 Filters, Screens, and Sensitive Components (cont'd.)
Mark
Do this each
Component More Data. See also Section 3.1.2 , page 21
1 2 3 4
5 6
x
200 hours strainer(s) for air inlet See Figure 15, page 32
x
2400 hours strainer in water regulator
for optional supply injec-
tor and pumped chemicals
on some models.
See Figure 11, page 30
x
200 hours strainer for steam inlet.
(Steam is optional on
some models.)
See Figure 14, page 32
x
200 hours speed sensor photoeye.
Optional on some models.
See Figure 18, page 35
x
2400 hours proximity switches See Figure 19, page 35
x
1200 hours oil filter for hydraulic tank See Figure 25, page 41. Replace the used with a new
one.Speak to your dealer or Milnor.
3.1.1.3 Fluid Containers
BNUUUH01.R11 0000399351 A.5 A.26 A.16 11/16/21 9:04 AM Released
Examine these items. Add fluid if necessary and keep components clean to prevent damage.
Table 3. Fluid Containers
Mark
Do this each
Component
More Data. See also Section 3.1.3 : Lubricant Identi-
fication, page 22
1 2 3 4
5 6
x
day*
hydraulic tank
See Figure 25, page 41 and Section 3.4.1 , page 41. Ex-
amine the oil level and temperature. Add oil 68 (Section
3.4.1 , page 41) if necessary. If the temperature is higher
than 130º F (54º C) or the oil is contaminated, mainte-
nance can be necessary. Speak to your dealer or Milnor.
x
600 hours See Section 3.4.2 , page 42. Examine the oil for contam-
ination. Remove the used oil from the tank and add oil
68 (Table 9, page 23) if necessary.
x
2400 hours Remove used oil from the tank. Add oil 68 (Table 9,
page 23).
x
200 hours Disc brake reservoir See Figure 23, page 39. Examine the oil level and qual-
ity. Add oil Dot3 (Table 9, page 23) if necessary. If the
oil is contaminated, it is necessary to bleed the brake
system. Speak to your dealer or Milnor. This is not rou-
tine maintenance.
none
gear reducer — CO-
BUDHFA, COBUD-E,
COBUD-H
Sealed. No oil maintenance necessary.
3.1.1.4 Components that Become Worn
BNUUUH01.R12 0000399389 A.5 A.26 A.23 11/16/21 11:00 AM Released
Examine these items. Tighten or replace the item if necessary, to prevent shutdowns and un-
satisfactory performance. Speak to your dealer for replacement parts.
Routine Maintenance