BeneLink Module Operator’s Manual 10-1
10 Alarm ID of External Devices (For BeneVision N
Series Monitors only)
For
the BeneVision N Series monitor, if it is desired that the storage, display, or audio
settings of a specific external device alarm be different from its category or priority,
you can set it individually by adding the Alarm ID to the alarm list. Refer to
“Interfacing with External Devices” of the N series Operator’s Manual (P/N:
046-011259-00) for the method.
This chapter lists the alarm IDs of external devices.
10.1 Alarm IDs of Anesthesia Machines
Alarm ID Alarm message Category Alarm priority Source
0xA5A1 Apnea Phys High Anes
0xA5A2 Volume Apnea > 2 min Phys High Anes
0xA5A3 Pressure Apnea Phys High Anes
0xA5A4 Paw High Phys High Anes
0xA5A5 Paw Low Phys High Anes
0xA5A6 High Paw Sustained Phys High Anes
0xA5A7 Pressure Limiting Phys Low Anes
0xA5A8 Sub-Atmospheric Paw Phys Medium Anes
0xA5A9 FiO2 High Phys Medium Anes
0xA5AA FiO2 Low Phys High Anes
0xA5AB VTe High Phys Medium Anes
0xA5AC VTe Low Phys Medium Anes
To Next Page
Loading...
Need help?
General