Comments and Body Marks 9-5
9.1.5 Modifying (Editing) Comments
îš„ Modifying (Editing) characters
1. In comment status, move the cursor over the comments to be modified.
z Press the alphabetic keys to enter the character at the cursor position.
z Or, double press <Set> to enter comment editing status and use the direction
keys to move the cursor to the desired location to insert/delete characters. Either
type characters by pressing the corresponding keys or select the new comment
text from the menu.
2. Press <Del.> to delete the comment character or text on the right side of the cursor.
Press <Backspace> to delete the comment character or text on the left side of the
cursor.
3. Roll the trackball or press <Set> to confirm the modification and exit the edit status.
The comment turns to yellow.
If there are already comments on the screen, press the space bar to enter editing
status.
îš„ Modifying (Editing) Arrows
1. Move the cursor over the arrow that needs to be modified. After the cursor turns to
, press the <Set> key. The current arrow turns green, and there is a green frame
around the arrow indicating that the arrow can be edited. Move the cursor to change
the arrow's position.
2.
Rotate the <Angle> knob to modify the arrow's direction.
3. Press the <Set> or <Enter> key to complete the operation.
9.1.6 Deleting Comments
îš„ Deleting comment characters, texts or arrows
(1) Move the cursor to the comment to be deleted.
(2) Press the <Set> key to select the comment.
(3) Press the <Del> key to delete the selected comment.
Or,
(1) Move the cursor to the comment to be deleted.
(2) Press <Clear> to delete the selected comment.
îš„ Deleting a recently-added character, text or arrow
If no comment is selected, press <Back> to delete the recently-added comment.
îš„ Delete all comments (characters, texts or arrows)
Press the <Clear> key to delete all comments.
NOTE: 1. When no object is selected, pressing the <Clear> key will clear all
comments and all measurements calipers.
2. After powering off, the system will clear all comments on the image.
To Next Page
Loading...
Need help?
General
